Zhejiang Sehome Home Technology Co.,Ltd
Specialize In Pvc Panels For Domestic and Commercial


Home > News > Content
PVC Panels To Hard Polyvinyl Chloride As Raw Material

  PVC Panels to hard polyvinyl chloride as raw material, can waterproof, moisture, moth. Contains flame retardant raw materials, so the use of safety. PVC plastic plate mostly plain color, but also imitation pattern, imitation marble pattern. Its section for the honeycomb mesh structure, both sides of the processing and forming the mouth and concave tenon, which is the selection of the details of the requirements of the mouth and concave tenon integrity straight, mutual bite smooth, no ups and downs and high degree of poor phenomenon. PVC plastic plate per square meter 12 to 20 yuan range, can be described as inexpensive. PVC plastic board Features: mechanical properties, excellent electrical properties, strong acid and alkali resistance, chemical stability, but low softening point. Suitable for the production of thin plates, wire and cable insulation, seals, etc. Its global use in the The highest in the synthetic materials. PVC is being produced and applied worldwide at a rate of 4%. In recent years, PVC plastic sheet in Southeast Asia, PVC Panels the growth rate is particularly significant, thanks to Southeast Asian countries have the urgent need for infrastructure construction. In the material that can produce three-dimensional surface film, PVC is the most suitable material. PP is polypropylene, PP chemical stability is excellent, for most of the acid, alkali, salt, oxidants are significantly inert.

  PVC Panels molding characteristics:

  1. Amorphous material, poor moisture absorption, poor mobility. In order to improve the mobility, PVC Panels to prevent the occurrence of air bubbles, plastic can be pre-drying. Mold casting system should be short, remove the dust bag bag dust removal parts of the attention, Large, do not suffer from dead ends. Mold to be cooled, the surface chrome.

  2. Due to its corrosive and fluid characteristics, PVC Panels it is best to use special equipment and mold. All products must be added to different types and quantities of additives as needed.

  3. Easily differentiated, at 200 degrees with the steel. Copper contact more easily differentiated, PVC Panels differentiation of corruption. Stimulation gas. Molding temperature range is small.

Contact Us

Zhejiang Sehome Home Technology Co.,Ltd

Add:Nianchang Village, Yuanhua Town, Haining, Zhejiang Province, Jiaxing, Zhejiang, China






View Our Events Calendar




Online Support



Address: Nianchang Village, Yuanhua Town, Haining, Zhejiang Province, Jiaxing, Zhejiang, China

Get in Touch
Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML